Trawler Wire Counter - Dual Non Linear

Twin.png

  • Solid state water proof instrument

  • Know exact length of cable

  • Touch controls

  • Keeps net perfectly aligned

  • Wire stretch reset on winding

  • Saves settings if power fails

  • Counts up and down

  • Large easy to read LED display

  • Counts in metres, fathoms. 

  • 5 year warranty

TECHNICAL SPECIFICATIONS

Power Supply 10 to 35 Volts D.C.

Accuracy 5 digit resolution.

Power Consumption 2.2 Watts.

Range 99,000 Metres.

Weather Resistant 100% waterproof.

Dimensions 100mm x 100mm x 40mm deep each instrument.

Outer casing High impact resistant nylon facia with all LEDs rear mounted.

Application All trawlers deep sea and inner reef, single double & tri-gear.

Pickup sender Custom designed to provide highest performance in the most severe conditions. The sender is small it has no moving parts and is completely sealed making it impervious to salt water.

Display 18 mm digital display with auto dim feature.

The Trawler Cable Counter is a particularly useful device that will count accurately the amount of cable and net that you wish to release. It allows the skipper or operator to be aware of the exact position of his nets at all times.

The instrument counts the cable/net in both directions and when retrieving the net the operator knows exactly how much net is still out.

Should the instrument be turned off, the current count is stored in its memory to be immediately available the next time the instrument is turned on. Not only that, but if someone lets out or retrieves some net without switching on the display it will still count and give an accurate count of what length of cable/net is out.

The digital display features large, bright LED figures for ease of viewing in any light condition.

The instrument carries a full replacement 5 year warranty.

It operates on either 12 or 24 volt DC.

Installation is simple and requires 4 magnets to be mounted onto the existing rotating end face of the winch and the sender is mounted onto the body with a four core cable from the sender to the instrument readout.

An instrument will be required for each winch and when installed will give you accuracy from ZERO to ONE HUNDRED KILOMETRES.