Bilge Level Sensor

No moving parts
Differentiates between OIL/Fuel and WATER!!
No spark contacts
No exposed metal parts so no corrosion.
Totally epoxy encapsulated
Unaffected by dirt and grease
12 or 24 volt DC operation
Simple owner installation
High Quality Tinned wiring
10 second "anti-roll" delay
5 year warranty
Handles 10 Amp Bilge Pumps

TECHNICAL SPECIFICATIONS

Power Supply 12 to 24 Volts D.C. auto-select.

Power Consumption 0.36 Watts On and 0.012 Watts in the off state.

Switching Capacity 10 Amps D.C. for higher currents add relay.

Protection Over-voltage protection.

Weather Resistant 100% waterproof, fully sealed for permanent immersion.

Dimensions: 185 mm x 70 mm x 30 mm.

Outer casing High impact resistant 6mm thick ABS casing with a specially formulated epoxy coating over the sensing element.

Application All marine bilge alarm or pump switching activities to unlimited pump size.

Number of Operations Infinite

Bilge pumps are an essential part of the safety system in any boat. When left to activate themselves in an un-monitored situation, mechanical trigger systems can often be suspect.

A new sensor system from TEK50 P/L completely eliminates the need for the moving parts and mechanisms that are often prone to failure.

The revolutionary new Bilge Level Sensor was the world's first totally solid state level sensing device which supersedes all other systems for reliability, repeatability and security in the bilges of all sizes and types of sea going vessels. It is 100% solid state, therefore problems associated with traditional mechanical switches, mercury switches, exposed electrode and pressure sensing systems are completely eliminated.

This digital water level detector and pump activator works without spark contacts or any mechanical operations. The unit is totally encapsulated with no part of the workings coming in contact with the liquid being controlled. It simply detects the rising at one level and activates a pump when a preset upper level is reached. The pump will continue to run until the liquid has returned to the lower level. The detector can be used with most fluids and acids usually encountered in boat bilges, with no long term effect on the accuracy or operation of the instrument. The operation is unaffected by an environment contaminated with dirt, grease. There is no oxidization of any component, pacification or electrolysis. When installed correctly, this device helps keep our harbors, rivers, and oceans clean. It can tell the difference between diesel and water! Do your bit to help the environment.

The detector controls pump motors up to 10 Amps DC running current and any size motor by activating through a remotely located relay or solenoid. On special applications the unit can be programmed to activate other emergency pumps if the primary pumps fail to cope with the rising liquid. LED indicator panels are available to indicate activation in multiple installations.

The instrument carries a full replacement 5 year Warranty.